Protected: Accessories – 10″ Ceiling Kit for Airrex HSC-12 spot cooler and AHSC-14 heat pump
The 10″ ceiling kit fits the Airrex HSC-12 spot cooler and the Airrex AHSC-14 heat pump
CONTACT US for Rental Quote
Perfect for hospitals, laboratories or any space where particulate-free air is required
We have HEPA filtration units that also use UV lighting to not only eliminate small particles but kill bacteria and other living airborne particles.
Showing 1–16 of 18 results
The 10″ ceiling kit fits the Airrex HSC-12 spot cooler and the Airrex AHSC-14 heat pump
OmniFlow Water Filtration System
- Our water filtration system is a portable, self priming system with 9 foot vertical lift.
- Maximum inlet pressure 30 psi; Maximum outlet pressure set at 45 psi.
- Our pumps can operate dry without causing damage to the pump and are protected from thermal o
OmniAire 600 Nitro (600N) Portable HEPA Air Scrubber
OmniAire 600 Nitro (600N) air scrubber is a compact, portable HEPA air filtration machine used to clean the air as well as create positive or negative air pressure
The OmniAire 600 Nitro works well in confined spaces eliminating mold, asbestos, and lead, as well as in commercial or factory sites, medical facilities, and other applications.
OmniAire 600N housings have clean, impact-resistant polyethylene housings designed to last job after job. Our rotationally molded and seamless construction assures that contaminated air will not bypass the 99.97% efficient HEPA filter. Lightweight, the OmniAire 600N air scrubber unit is only 36 lbs with filters installed. Molded connections for flex ducting on both intake and discharge sides allow for the convenient direction of airflow intake or exhaust. The ability to securely stack the 600N up to three high while in operation, and during transportation or storage will save valuable setup time and space.
Daisy-chaining up to three Nitro air scrubbers is possible with an integrated 8 Amp GFI protected outlet, expanding air cleaning capacity to meet your demand. All 600N units come with an integrated 12 amp circuit breaker to prevent overloads from damaging the machine. Units can be ordered in 115V or 220V configuration and are suitable for use worldwide.
Depending on environmental demands, the Nitro offers an assortment of options for prefilters and final filters. The standard OA600N ships with a Dustlok, primary/secondary filter, and HEPA 99.97% filter configuration.
For your safety, the OmniAire 600N scrubber complies with OSHA, UL and CSA/IEC electrical safety requirements.
OmniAire 600N Applications:
- HEPA filtration during abatement of mold, asbestos, and lead.
- Renovation projects or light construction.
- Create negative or positive pressure containment areas.
- Removal or control of odors, VOCs, or fumes.
- Medical facilities and labs.
OmniAire 600N Accessories:
- GEO95, MERV-14 efficiency filters provide economical filtration for non-hazardous dust and contaminants. GEO95 is an extremely durable and high capacity filter for bulk dust collection.
- OdorGuard 600 carbon filters when added optionally provide effective control of odors, VOCs, or fumes. OdorGuard Filters can be installed behind the dustlok pre-filter for individual projects, or whenever necessary.
- Optional 2” MERV-11 pleated filters can be easily installed into NITRO scrubbers to remove fine dust particulate.
HEPA Applications:
- Mold, asbestos, lead abatement
- Restoration and maintenance projects
- Removal of construction dust,- use HEPA or economical GEO95 filter, rated MERV14 in place of HEPA filter
- Removal of chemical fumes and biological contaminant – use OdorGuard600 activated carbon filter with HEPA or GEO95 filter.
- Create negative pressure containment.
GEO95 Applications:
- Drywall Dust
- Sawdust
- Non-hazardous particulates
Protected: Airrex HEPA 2000 – Negative Air Machine – 115V
Airrex HEPA 2000 Negative Air Machine
Airrex HEPA filtration removes airborne particles down to .3 micron in size with 99.97% efficiency. The Airrex HEPA 2000 provide relief from allergy, asthma, sinus problems, mold spores, pathogens, and chemical irritations. These units are also used in hospital remodels and new construction to reduce air born dust. The Airrex units are excellent in reducing the indoor pollution that have been proven to make us feel sick. The HEPA 2000 unit uses replaceable 1st stage and 2nd stage filters that help extend the usage of the HEPA filter. All replacement parts and filters are available at Airrex USA.
- Cooling capacity: N/A
- Heating capacity: N/A
- Voltage: 115V
- Power supply: 1ph 115V 60Hz
- Current consumption (amps): N/A
- Circuit breaker size (amps): 15
- Rated power consumption: N/A
- Amp rating: N/A
- Compressor input: N/A
- Air flow (cfm, high/low) evaporator: 1950/1420
- Static pressure: N/A
- Power cord: N/A
- Power cord length: 4’11”
- Operating conditions: N/A
- Nema plug: 5-15
- Electric heat(optional): N/A
- Noise level (decibel 1m): N/A
- Moisture removal max (gal/h): N/A
OmniAire 2000C HEPA Air Machine
The OmniAire 2000C is our construction-grade negative air machine with high airflow, reliable service
This machine can be used to create positive or negative air pressure containment areas for mold, asbestos, and lead abatement projects, silica containment on construction sites, restoration projects after water/fire damage, health care facilities, and many other applications. With numerous optional pre and final filters, OmniAire 2000C machines are suitable for a large array of jobs from light construction, to tasks that require true 99.99% HEPA efficiency. The 2000C has a durable, heavy-duty galvanized steel housing designed and produced to last job after job.
OmniAire products provide a cleaner and healthier environment in industrial facilities as well as abatement projects.
OmniAire 2000C Applications:
- Abatement of mold, asbestos, and lead
- Silica dust containment
- Restoration projects after flood and fire
- Medical facilities to prevent the spread of virus and bacteria during renovation and maintenance
- Removal of construction dust generated by grinding concrete, sanding wood, and many other tasks. Use economical Bag Filter assembly in place of the HEPA filter
For your safety, OA2000C comply with OSHA, UL, and CSA/IEC electrical safety requirements.
OmniAire 2200CBF Bag Filter Air Machine
OmniAire 2200CBF Bag Filter is a construction grade air scrubber equipped with a 95% ASHRAE bag filter and 2-stage pre-filter
OmniAire 2200CBF Bag Filter is a construction grade air scrubber equipped with a 95% ASHRAE bag filter and 2-stage pre-filter. The economical bag filter has a high capacity to collect bulk dust from cutting or grinding of concrete, wood, or plaster, great for containment of silica, plaster, wood, and other construction dust. This negative air machine can be used on projects where dust control is necessary but HEPA filtration is not a requirement but then easily switched over with a simple filter swap to a 12” deep HEPA 99.97%, 0.3 μ filter, or HEPA 99.99%, 0.3 μ filter (HEPA filters sold separately).
OmniAire equipment provides a cleaner and healthier environment in industrial facilities as well as abatement projects.
OmniAire 2200CBF Bag Filter Applications:
- For collection of silica or construction dust from cutting or grinding of concrete, wood or plaster
- Restoration projects after flood and fire
- Medical facilities during renovation and maintenance
- Removal of construction dust with the use of the Bag Filter module.
- Cleaner environment in industrial facilities
- Removal of construction dust generated by grinding concrete, sanding wood and many other tasks
OmniAire 2200CBF Accessories
- Activated carbon filters for removal of chemical fumes and biological contaminants
- Intake manifold for flex hose connection
- PEROx Air Purification module for the destruction of VOCs, odors, viruses, and bacteria
For your safety, the OmniAire 2200CBF is OSHA, UL, and CSA/IEC compliant for electrical safety.
OmniAire 2200C HEPA Air Machine
OmniAire 2200CBF Bag Filter is a construction grade air scrubber equipped with a 95% ASHRAE bag filter and 2-stage pre-filter
- Abatement of mold, asbestos and lead
- For collection of silica dust from cutting or grinding of concrete
- Restoration projects after flood and fire
- Medical facilities to prevent spread of virus and bacteria during renovation and maintenance
- Removal of construction dust with use of Bag Filter module in place of the HEPA filter
- Create “Clean Room” environment in industrial facilities
- Removal of construction dust generated by grinding concrete, sanding wood and many other tasks. Use economical Bag Filter assembly in place of the HEPA filter
OmniAire 2200UL HEPA Air Machine
The OmniAire 2200UL is a popular, full-sized negative air machine with HIGH/LOW airflow settings which produces 1000 or 2000 CFM
The OmniAire 2200UL is a popular, full-sized negative air machine with HIGH/LOW airflow settings which produces 1000 or 2000 CFM and weighs only 137 lbs.
OmniAire 2200UL HEPA air machines are used to clean the air as well as create positive or negative air pressure containment areas on job sites, in confined spaces, mold, asbestos, and lead abatement or remediation, commercial or factory sites, medical facilities, and many other places. With numerous optional filters, the OA2200UL is suitable for a large array of jobs from light construction, to tasks that require true 99.99% HEPA efficiency.
OmniAire 2200UL machines have an easy to sanitize powder-coated aircraft-grade aluminum housing, designed to last job after job. Our housings have a smooth, clean finish and individually riveted construction; with hospital-grade non-marking casters allowing for easy portability. All critical seams are silicone sealed before and after riveting to assure that contaminated air will not bypass the HEPA filter.
2200UL machines offer an assortment of options for pre-filters, HEPA filters, and accessories. Our standard machine configuration ships with a Dustlok, primary/secondary filter and a 99.97% efficient HEPA filter. Dustlok pre-filters are treated with an anti-microbial additive to prevent the growth of bacteria, and a tackifier to increase dust holding capacity.
OmniAire equipment provides a cleaner and healthier environment in industrial facilities as well as abatement projects.
OmniAire 2200UL Applications:
- Abatement of mold, asbestos and lead
- Restoration projects after flood and fire
- Medical facilities to prevent spread of virus and bacteria during renovation and maintenance
- Removal of construction dust with use of Bag Filter module in place of the HEPA filter
- Create “Clean Room” environment in industrial facilities
- Removal of construction dust generated by grinding concrete, sanding wood and many other tasks. Use economical Bag Filter assembly in place of the HEPA filter
OmniAire 2200UL Accessories:
- To direct airflow as needed, optional intake manifold adapters can be added to the OA2000V that simply drop into the rear or the machine. Our manifold adapters are made of durable ABS plastic and allow the machines to operate outside of the containment area and connect to the containment with a flexible hose.
- OdorGuard 600 carbon filters when added optionally provide effective control of odors, VOCs, or fumes. OdorGuard Filters can be installed behind the Dustlok pre-filter for individual projects, or whenever necessary.
- MERV-14 Bag Filter w/ 9-Pockets, for bulk collection of construction dust and similar contaminants. Bag filters can be installed in conjunction with a bag filter housing module to function as an optional final filter.
- PEROx Air Purification module for destruction of VOCs, odors, virus and bacteria
For your safety, the OmniAire 2200UL machine is OSHA, UL and CSA/IEC compliant for electrical safety.
OmniAire 600V HEPA Air Machine
Highly portable, the OmniAire 600V produces 150 to 600 CFM and weighs only 55 lbs
OmniAire 600V HEPA air machines are used to clean the air as well as create positive or negative air pressure containment areas on job sites, in confined spaces, mold, asbestos, and lead abatement or remediation, commercial or factory sites, medical facilities, and many other places. With numerous optional filters, the 600V is suitable for a large array of jobs from light construction, to tasks that require true 99.99% HEPA efficiency.
Our housings have a smooth, clean finish and individually riveted construction; with hospital-grade non-marking casters allowing for easy portability. All critical seams are silicone sealed before and after riveting to assure that contaminated air will not bypass the HEPA filter. OmniAire 600V machines have an easy to sanitize aluminum housing, designed to last job after job.
The 600V offers an assortment of options for pre-filters, HEPA filters, and accessories. Our standard machine configuration ships with a Dustlok, primary/secondary filter, and a 99.97% efficient HEPA filter. Dustlok pre-filters are treated with an anti-microbial additive to prevent the growth of bacteria, and a tackifier to increase dust holding capacity.
OmniAire 600V Applications
- HEPA filtration during abatement of mold, asbestos, and lead.
- Renovation projects or light construction.
- Create negative or positive pressure containment areas.
- Removal or control of odors, VOCs, or fumes.
- Medical facilities and labs.
OmniAire 600V Accessories
- UV germicidal irradiation modules for virus, bacteria, and bio-contaminants
- To direct airflow as needed, optional intake manifold adapters can be added to the OmniAire 600V that simply drop into the rear or the machine. Our manifold adapters are made of durable ABS plastic and allow the machines to operate outside of the containment area and connect to the containment with a flexible hose.
- OdorGuard 600 carbon filters when added optionally provide effective control of odors, VOCs, or fumes. OdorGuard filters can be installed behind the Dustlok pre-filter for individual projects, or whenever necessary.
For your safety, the OmniAire 600V complies with OSHA, UL and CSA/IEC electrical safety requirements.
OmniAire equipment provides a cleaner and healthier environment in industrial facilities as well as abatement projects.
OmniGuard 5 Differential Pressure Monitor
The Omniguard 5 is a differential pressure recorder in a completely self-contained package, designed from the beginning to be extremely flexible yet easy to use.
This pressure monitor uses real-time monitoring of differential pressure and/or vacuum level, with duel inlet ports to allow monitoring between two areas. Multiple reports available at the touch of a key and the view log on screen makes it easy to scroll through the entire memory contents. The USB Type-A port lets you save logs directly to a flash drive as an additional logging option and a second USB port supports PC communication for transferring job logs, real-time monitoring and configuration editing. A built-in Lithium-Ion battery supports portable operation up to 6 hours without the use of AC for total flexibility.
Features of Omniguard 5
- Simple to set up and use with 4.3″ Color LCD touch screen interface
- Real-time monitoring of differential pressure and/or vacuum level
- Built-in cell modem lets you know what’s happening at the job site automatically
- 95-decibel audible alarm notifies workers and bystanders when containment is lost
- Pressure displayed in Inches WC, Millimeters WC or Pascals
- Thermal printer, no ink ribbons
- Rugged self-contained unit includes power cord, owner’s manual, 10′ of hose and spare paper roll stored in the case
OmniAire 1000V HEPA Air Machine
The OmniAire 1000V is a popular, compact-sized negative air machine, which produces 350 to 900 CFM and weighs only 75 lbs.
OmniAire 1000V HEPA air machines are used to clean the air as well as create positive or negative air pressure containment areas on job sites, in confined spaces, mold, asbestos, and lead abatement or remediation, commercial or factory sites, medical facilities, and many other places. With numerous optional filters, the 1000V is suitable for a large array of jobs from light construction, to tasks that require true 99.99% HEPA efficiency.
Our housings have a smooth, clean finish and individually riveted construction; with hospital-grade non-marking casters allowing for easy portability. All critical seams are silicone sealed before and after riveting to assure that contaminated air will not bypass the HEPA filter. These machines have an easy to sanitize aluminum housing, designed to last job after job.
OmniAire 1000V machines offer an assortment of options for pre-filters, HEPA filters, and accessories. Our standard machine configuration ships with a Dustlok, primary/secondary filter and a 99.97% efficient HEPA filter. Dustlok pre-filters are treated with an anti-microbial additive to prevent the growth of bacteria, and a tackifier to increase dust holding capacity.
OmniAire 1000V Applications:
- HEPA filtration during abatement of mold, asbestos, and lead.
- Renovation projects or light construction.
- Create negative or positive pressure containment areas.
- Removal or control of odors, VOCs, or fumes.
- Medical facilities and labs.
OmniAire 1000V Accessories:
- To direct airflow as needed, optional intake manifold adapters can be added to the OmniAire 1000V that simply drop into the rear or the machine. Our manifold adapters are made of durable ABS plastic and allow the machines to operate outside of the containment area and connect to the containment with a flexible hose.
- OdorGuard 600 carbon filters when added optionally provide effective control of odors, VOCs, or fumes. OdorGuard Filters can be installed behind the Dustlok pre-filter for individual projects, or whenever necessary.
For your safety, the 1000V complies with OSHA, UL and CSA/IEC electrical safety requirements.
OmniAire 2000V HEPA Air Machine
The OmniAire 2000V is a popular, medium-sized negative air machine with variable speed control which produces 300 to 1600 CFM
The OmniAire 2000V is a popular, medium-sized negative air machine with variable speed control which produces 300 to 1600 CFM and weighs only 110 lbs.
OmniAire 2000V HEPA air machines are used to clean the air as well as create positive or negative air pressure containment areas on job sites, in confined spaces, mold, asbestos, and lead abatement or remediation, commercial or factory sites, medical facilities, and many other places. With numerous optional filters, the 2000V is suitable for a large array of jobs from light construction, to tasks that require true 99.99% HEPA efficiency.
2000V machines have an easy to sanitize aircraft-grade aluminum housing, designed to last job after job. Our housings have a smooth, clean finish and individually riveted construction; with hospital-grade non-marking casters allowing for easy portability. All critical seams are silicone sealed before and after riveting to assure that contaminated air will not bypass the HEPA filter.
OA2000V machines offer an assortment of options for pre-filters, HEPA filters, and accessories. Our standard machine configuration ships with a Dustlok, primary/secondary filter and a 99.97% efficient HEPA filter. Dustlok pre-filters are treated with an anti-microbial additive to prevent the growth of bacteria, and a tackifier to increase dust holding capacity.
OmniAire provides a cleaner and healthier environment in industrial facilities as well as abatement projects.
OmniAire 2000V Applications:
- HEPA filtration during abatement of mold, asbestos, and lead.
- Renovation projects or light construction.
- Create negative or positive pressure containment areas.
- Removal or control of odors, VOCs, or fumes.
- Medical facilities and labs or for patient isolation rooms.
OmniAire 2000V Accessories:
- To direct airflow as needed, optional intake manifold adapters can be added to the 2000V that simply drops into the rear of the machine. Our manifold adapters are made of durable ABS plastic and allow the machines to operate outside of the containment area and connect to the containment with a flexible hose.
- OdorGuard 600 carbon filters when added optionally provide effective control of odors, VOCs, or fumes. OdorGuard Filters can be installed behind the Dustlok pre-filter for individual projects, or whenever necessary.
- MERV-14 Bag Filter w/ 9-Pockets, for bulk collection of construction dust and similar contaminants. Bag filters can be installed in conjunction with a bag filter housing module to function as an optional final filter.
KwiKool Bioair™ KBP600 – A Negative Air-Capable ULPA HEPA Filtration Unit with Internal UV-C Lights for Air Purification – Available with 600 and 1,000 CFM
The Latest Innovation in Air Cleaning,
Negative Air, and Purification
Configure It YOUR Way
The Bioair™ line by KwiKool combines Air Filtration plus Air Purification, and/or Negative Air
- Dual function negative air/air purification OR can be used solely as a negative air machine or as a room air purifier
- Internal UV-C lights to kill airborne pathogens
- ULPA HEPA Filtration with pre-filter—99.99% efficiency for particulates .012 microns or more in diameter
- 3-Speed Fan
- 600 CFM (CPH is up to 30/hour in 1000 cf space) ALSO AVAILABLE as 1000 CFM (CPH is up to 60/hour in 1000 cf space)
- Stainless steel cabinet
- Small footprint (16-¼” wide x 22-1/4” long x 40” high)
- UV-C timer alarm
- HEPA filter alarm
- Touchscreen controls
- Optional Carbon filter
Pricing
- Bioair™ KBP600 – $2595 (LTL Dock-to-Dock Delivery included)
- Bioair™ KBP1000 – $3295 (LTL Dock-to-Dock Delivery included)
KwiKool Bioair™ KBP1000 – A Negative Air-Capable ULPA HEPA Filtration Unit with Internal UV-C Lights for Air Purification – 1000 CFM
The Latest Innovation in Air Cleaning,
Negative Air, and Purification
Configure It YOUR Way
The Bioair™ line by KwiKool combines Air Filtration plus Air Purification, and/or Negative Air Capability
- Dual function negative air/air purification OR can be used solely as a negative air machine or as a room air purifier
- Internal UV-C lights to kill airborne pathogens
- ULPA HEPA Filtration with pre-filter—99.99% efficiency for particulates .012 microns or more in diameter
- 3-Speed Fan Motor
- 1000 CFM (CPH is up to 60/hour in 1000 cf space) ALSO AVAILABLE as 600 CFM (CPH is up to 36/hour in 1000 cf space)
- All Stainless steel cabinet
- Small footprint (16-¼” wide x 22-1/4” long x 40” high)
- UV-C timer alarm
- HEPA filter alarm
- Touchscreen controls
- Optional Carbon filter
Pricing
- Bioair™ KBP600 – $2595 (LTL Dock-to-Dock Delivery included)
- Bioair™ KBP1000 – $3295 (LTL Dock-to-Dock Delivery included)
KwiKool KBIO1411 – HEPA, UV Air Conditioner – 13,800 BTU air-cooled 115V/1ph
Medical Grade Portable Air Conditioning & Cleaning
The Model KBIO1411 (nominal 1.1-ton or 13,800 BTU) is the newest KwiKool Portable Cooling System in The BioKool Series.
KwiKool’s BioKool Series exclusive 4 point “air therapy” process cools, cleans, disinfects, and retards mold & microbe growth. This means that the KBIO1411 model will clean 99.999% of all particulates greater than .03 microns in size and reduces microorganisms by irradiating the evaporator coil, airstream, and the internal surfaces of the evaporator chamber, all while controlling the temperature.
The BioKool Series KBIO1411 is quick and easy to install with its “plug and play” technology and has a patent-pending. From its hi-tech microprocessor controls and self-diagnostics to the long list of standard features (most of which are not even available in other brands of ordinary spot coolers), the BioKool Series KBIO1411 is in a class by itself and will give you the clean cool space that you need.
** Exhaust duct required in most cases. Pumps are recommended for indoor applications.
- MADE IN USA! – ETL and CETL listed to UL and CSA standards
- Compact yet Powerful -13,800 BTU/H – 1-Ton capacity air-cooled
- Runs on 115V 15 amp circuit – Wide Operating range of 65ºF-105ºF
- ULPA Filter – Filters 99.999% of particulates greater than .3 microns in size
- Internal UVC light irradiates the evaporator coil, air stream and the internal surfaces of the evaporator chamber
- UVC light interlock switches that turn the UVC light off for access door openings
- Dual ducting: provides balanced air pressure to prevent entry of outside contamination
Specification Sheet Brochure Warranty
CONTACT US for Rental Quote
OmniAire 1200PAC HEPA Portable Air Cleaner
OmniAire 1200PAC Portable Air Cleaner is designed for use in hospital and medical environments or where there is a risk of bio-contaminants such as a virus.
The combination of a medical-grade 99.99% HEPA filter and UV Germicidal-Irradiation offers the highest level of protection for both health care professionals and patients. The major design elements of this machine include quiet operation, fully variable airflow, lightweight, and a small footprint.
The major design elements of this machine include quiet operation, fully variable airflow, lightweight, and a small footprint. Versatile, the 1200PAC machines can be used to provide either positive or negative pressure environments or act as a re-circulation air scrubber device. Our medical line of machines utilizes an upright housing configuration on smooth-rolling, 3″ hospital-grade casters resulting in a highly portable and effective solution for healthcare facility air quality concerns.
Patient Room Cleanup – Turnaround Time
We are always concerned with providing the highest levels of protection for hospital workers and patients. After hospital cleaning staff carry out infectious disease control cleanup procedures (the removal of all physical items) in the infected areas, hospital rooms, and healthcare facilities can then be put back in service faster if the air is purified with a 99.99% efficient@ .3 Micron HEPA filter, and sterilized with UVG-I lights using an OmniAire 1200PAC Portable Air Cleaner. This results in minimal room shut down and disruption, which is a major concern for all hospital administrations.