We recommend the MovinCool Climate Pro D12 Portable Heat Pump
The Climate Pro D12 heat pump is an all-in-one system for temperature control in any season. It delivers 11,450 Btu/h of cooling and 9,900 Btu/h of heating — with a space-saving footprint of just over 4 sq. ft.
Minimal electricity. Runs on 115V with 15 amp circuit and consumes just 1.38 kW (cooling) or 1.25 kW (heating).
Effective cooling in conditions from 65° to 95°F.
Provides heating in conditions from 24° to 80°F (with plenum and air entering outdoor heat exchanger)
Avoid downtime from overheated electronics and lost productivity from employee discomfort with the Climate Pro D12.
The Climate Pro D12 brings advanced design to give you the best in safety and ease of operation.
With programmable electronics for automatic operation after hours and on weekends, you will save on electricity.
Wireless connectivity-ready for remote monitoring and e-notifications of performance allows monitoring 24/7 from any location.
Cooling and Heating in one system – Airrex AHSC-14
Airrex heat pumps operate in air temperatures from 68°to 113°F for cool mode and 50°to 81°F for heat mode. This heat pump utilizes eco-friendly 410A refrigerant. Includes removable, washable air filters for easy maintenance. The thermostatically protected compressor includes high and low-pressure warnings.
Cooling and Heating in one system – Airrex AHSC-18
Airrex heat pumps operate in air temperatures from 68°to 113°F for cool mode and 50°to 81°F for heat mode. This heat pump utilizes eco-friendly 410A refrigerant. Includes removable, washable air filters for easy maintenance. The thermostatically protected compressor includes high and low-pressure warnings.
With its full-featured design, high sensible cooling, and balanced air system, the KwiKool KPHP1811 is the perfect solution for comfort cooling and heating applications.
The PHP Series is quick and easy with its “plug and play” technology and tops the competition in its small size, big performance, and tons of features. From its hi-tech microprocessor controls and self-diagnostics to the long list of standard features the PHP Series outperforms other portables and all at a price that is comparable to other available products. Unlike other heat pump brands, the KwiKool heat pump will operate all the way down to 45 degrees F.
All PHP Series units come standard with our exclusive I/O Integral Condenser Dual Ducting, which provides isolated and balanced air pressure within the space for maximum cooling efficiency. The KPHP1811 runs on a standard 115-volt/15-amp circuit with automatic restart after a power failure. The unit comes with an internal high lift condensate pump and a 5-gallon exterior condensate tank with float activated unit cut off for short term use.
13,850 BTU/H – 1.1-ton capacity Cooling
17,010 BTU/H – 1.5-ton capacity Heating
Compact yet Powerful
Runs on 115V 15 amp circuit
Operates down to a 45 degree F. ambient environment
Balanced air pressure using separate condenser air input & output
Superior safety compared to electric heaters
Standard high pressure condensate pump
Easy-touch control pads make changing system settings a snap.
Independent evaporator and condenser motors
Auto restart in the event of power failure
Heavy-duty locking casters.
Fully insulated, heavy duty galvanized steel cabinet with KwiKool’s exclusive E-Z Clean™ scratch-resistant attractive two-tone HammerCoat™ epoxy protective finish for optimum durability, efficiency, low maintenance and quiet operation.
Outperforms other portables at a price comparable to similar products
The KwiKool KPHP2211 (21,240 or nominal 1.8-ton Heating and 17,700 or nominal 1.5-ton BTU cooling capacities) is the smallest unit possible in size and capacity in The PHP Portable Heatpump Series, KwiKool’s combined heating and air conditioning models.
With its full-featured design, high sensible cooling, and balanced air system, the KPHP2211 is the perfect solution for comfort cooling and heating applications.
The PHP Series is quick and easy with its “plug and play” technology and tops the competition in its small size, big performance, and tons of features.
From its hi-tech microprocessor controls and self-diagnostics to the long list of standard features the PHP Series outperforms other portables and all at a price that is comparable to other available products. Unlike other heat pump brands, the KwiKool heat pump will operate all the way down to 45 degrees F.
All PHP Series units come standard with our exclusive I/O Integral Condenser Dual Ducting, which provides isolated and balanced air pressure within the space for maximum cooling efficiency.
The KPHP2211 runs on a standard 115-volt/20-amp circuit with an automatic restart after a power failure.
The unit comes with an internal high lift condensate pump and a 5-gallon exterior condensate tank with float activated unit cut off for short term use.
And, KwiKool products are proudly MADE IN AMERICA.
17,700 BTU/H – 1.5-ton capacity Cooling
21,240 BTU/H – 1.8-ton capacity Heating
Runs on 115V 20 amp circuit
Operates down to a 45 degree F. ambient environment
Balanced air pressure using separate condenser air input & output
Superior safety compared to electric heaters
Standard high-pressure condensate pump
Easy-touch control pads make changing system settings a snap.
Independent evaporator and condenser motors
Auto-restart in the event of power failure
Heavy-duty locking casters.
Fully insulated, heavy-duty galvanized steel cabinet with KwiKool’s exclusive E-Z Clean™ scratch-resistant attractive two-tone HammerCoat™ epoxy protective finish for optimum durability, efficiency, low maintenance, and quiet operation.
The OceanAire 2OACH1211 portable air-cooled heat pump is designed for permanent or temporary spot cooling or heating applications.
Whether you’re up against the coldest winter or hottest summer, this American-made unit will deliver year after year. It distributes cooled or heated air to specific areas or objects through a supply grill located on the upper front of the unit while discharging exhaust air from the top of the unit.
The unit is encased in a sturdy blue and gray polyester powder-coated 18-gauge sheet metal cabinet. The solid-state electronic controller provides a range of options for temperature and airflow, to deliver the desired level of comfort when cooling or heating.
Accessories are available including an optional condensate pump, nozzles, and flexible duct exhaust kits.
Dedicated circuit and time-delay fuses/circuit breakers are recommended.
Specifications are subject to change without notice.
Amps: 10.4
Voltage: 115V
Solid-state electronic controller
Large LED display
Automatic mode changeover
6-speed fan control
Swivel casters (front locking)
10-foot power cord LCDI
Washable electrostatic air filter
Manual reset high-pressure safety switch
5-gal. condensate reservoir tank
Condensate overflow alert
UL Listed (U.S.A. and Canada)
Made in the U.S.A.
Weight 180 lbs.
37 ¾” H x 20” W × 25” D
Cooling Ambient Operating Range: 65ºF to 105ºF
Heating Ambient Operating Range: 40ºF to 85ºF
Not Approved for Outdoor Use
1.5-ton 115V, 2-ton 208-230V/1Ph, 3-ton 208-230V/1Ph or 3Ph, 460V/3Ph; and 5-ton 208-230V/1Ph or 3Ph, 460V/3Ph models are also available.
Year-round utility with heating and cooling from a single unit
The Climate Pro D12 heat pump is an all-in-one system for temperature control in any season. It delivers 11,450 Btu/h of cooling and 9,900 Btu/h of heating ? with a space-saving footprint of just over 4 sq. ft.
Minimal electricity. Runs on 115V with 15 amp circuit and consumes just 1.38 kW (cooling) or 1.25 kW (heating).
Effective cooling in conditions from 65? to 95?F.
Provides heating in conditions from 24? to 80?F (with plenum and air entering outdoor heat exchanger).
Programmable electronics for automatic operation after hours and on weekends.
Wireless connectivity-ready for remote monitoring and e-notifications of performance.
The 2OACH1811 portable air-cooled heat pump is designed for permanent or temporary spot cooling or heating applications.
Whether you’re up against the coldest winter or hottest summer, this American-made unit will deliver year after year. It distributes cooled or heated air to specific areas or objects through a supply grill located on the upper front of the unit, while discharging exhaust air from the top of the unit.
The unit is encased in a sturdy blue and gray polyester powder-coated, 18-gauge sheet metal cabinet. The solid-state electronic controller provides a range of options for temperature and airflow, to deliver the desired level of comfort when cooling or heating.
Accessories are available including an optional condensate pump, nozzles and flexible duct exhaust kits.
Dedicated circuit and time delay fuses/circuit breakers are recommended.
Specifications are subject to change without notice. [NOTE: THIS MUST APPEAR ON EACH PAGE FOR EACH MACHINE ON THE ENTIRE WEBSITE]
Amps: 14.1
Voltage: 115V
Solid state electronic controller
Large LED display
Automatic mode changeover
Swivel casters (Front locking)
10-foot power cord LCDI
Washable electrostatic air filter
Manual reset high-pressure safety switch
5-gal. condensate reservoir tank
Condensate overflow alert
UL Listed (U.S.A. and Canada)
Made in the U.S.A.
Weight 260 lbs.
45 ¾” H x 24” W × 30” D
Cooling Ambient Operating Range: 65ºF to 105ºF
Heating Ambient Operating Range: 40ºF to 85ºF
Not Approved for Outdoor Use
1-ton 115V/1Ph, 2-ton 208-230V/1Ph, 3-ton 208-230V/1Ph or 3Ph, 460V/3Ph; and 5-ton 208-230V/1Ph or 3Ph, 460V/3Ph models are also available.
The 2OACH2412 portable air-cooled heat pump is designed for permanent or temporary spot cooling or heating applications.
Whether you’re up against the coldest winter or hottest summer, this American-made unit will deliver year after year. It distributes cooled or heated air to specific areas or objects through a supply grill located on the upper front of the unit while discharging exhaust air from the top of the unit.
The unit is encased in a sturdy blue and gray polyester powder-coated 18-gauge sheet metal cabinet. The solid-state electronic controller provides a range of options for temperature and airflow, to deliver the desired level of comfort when cooling or heating.
Accessories are available including an optional condensate pump, nozzles, and flexible duct exhaust kits.
Dedicated circuit and time-delay fuses/circuit breakers are recommended.
Specifications are subject to change without notice.
Amps: 14.9
Voltage: 208-230V/1Ph
Solid-state electronic controller
Large LED display
Automatic mode changeover
6-speed fan control
Swivel casters (Front locking)
10-foot power cord LCDI
Washable electrostatic air filter
Manual reset high-pressure safety switch
5-gal. condensate reservoir tank
Condensate overflow alert
UL Listed (U.S.A. and Canada)
Made in the U.S.A.
Weight 260 lbs.
45 ¾” H x 24” W × 30” D
Cooling Ambient Operating Range: 65ºF to 105ºF
Heating Ambient Operating Range: 40ºF to 85ºF
Not Approved for Outdoor Use
1- and 1.5-ton 115V, 3-ton 208-230V/1Ph or 3Ph, 460V/3Ph; and 5-ton 208-230V/1Ph or 3Ph, 460V/3Ph models are also available.
With a space-saving footprint of slightly over 4 sq. ft., the Climate Pro D18 delivers 15,000 Btu/h of spot cooling and 13,100 Btu/h of supplemental heating. It?s a year-round solution for keeping people comfortable and productive ? and for keeping electronics up and running.
Modest power usage. Runs on 115V/20 amp circuit and consumes 1.56 kW (cooling) and 1.31 kW (heating).
Effective cooling in conditions from 65? to 95?F.
Provides heating in conditions from 24? to 80?F (with plenum and air entering outdoor heat exchanger)
Airrex heat pumps operate in air temperatures from 68°to 113°F for cool mode and 50°to 81°F for heat mode. This heat pump utilizes eco-friendly 410A refrigerant. Our heat pumps may require a fresh air supply for proper operation. Includes removable, washable air filters for easy maintenance. The thermostatically protected compressor includes high and low-pressure warnings has 42,000 BTU cooling feature and 47,000 BTU heating feature 12″ supply duct and 16″ return duct and 26″ diameter top warm air discharge. 1 Year Warranty. 3 Year LG compressor warranty.
Cooling capacity: 42,000
Heating capacity: 47,000
Voltage: 220V
Power supply: 1ph 220V 60Hz
Current consumption (amps): 20.8 (Cool) 20.6 (Heat)
The 2OACH3612 portable air-cooled heat pump is designed for permanent or temporary indoor spot cooling or heating applications.
Whether you’re up against the coldest winter or hottest summer, this American-made unit will deliver year after year. It distributes cooled or heated air to specific areas or objects through a supply air grill located on the upper front of the unit while discharging exhaust air from the top of the unit.
The unit is encased in a sturdy, blue and gray polyester powder-coated 18-gauge sheet metal cabinet. The solid-state electronic controller provides a range of options for temperature and airflow, to deliver the desired level of comfort when cooling or heating.
Accessories are available including an optional condensate pump, nozzles, and flexible duct exhaust kits.
Dedicated circuit and time-delay fuses/circuit breakers are recommended.
Specifications are subject to change without notice.
Amps: 19.6
Voltage: 208-230V/1Ph
Solid-state electronic controller
Large LED display
Automatic mode changeover
6-speed fan control
Swivel casters (Front locking)
10-foot power cord LCDI
Washable electrostatic air filter
Manual reset high-pressure safety switch
5-gal. condensate reservoir tank
Condensate overflow alert
UL Listed (U.S.A. and Canada)
Made in the U.S.A.
Weight 365 lbs.
50 ¼ ” H x 27 ½” W × 35” D
Cooling Ambient Operating Range: 65ºF to 105ºF
Heating Ambient Operating Range: 40ºF to 85ºF
Not Approved for Outdoor Use
1 and 1.5-ton 115V, 3-ton 208-230V/3PH or 460V/3PH; and 5-ton 208-230V/1PH or 3PH, 460V/3PH models are also available.
Portable Commercial Air Conditioners for Cooling and Heating
The 2OACH3632 is OceanAire’s deluxe range of portable air-cooled heat pumps designed for permanent or temporary spot cooling or heating applications. The entire air conditioning unit has been built in a premium sheet metal cabinet, equipped with heavy-duty casters for mobility.
Emergency Heat – Portable and Efficient
Oceanaire’s 2OACH3632 is a portable air conditioning that can provide emergency heat and emergency cooling capabilities. This unit offers the utmost in commercial and industrial heating and cooling power and efficiency. Whether you’re up against the coldest winter or hottest summer, the 2OACH3632 is an American made emergency heat and cooling unit that will deliver – year after year.
Portable Heat Pump and Cooling Unit
All 2OACH models come with a 10-foot power cord for electrical connection and added mobility in service. These heat pumps direct cooled or heated air to specific areas or objects through a discharge grill located on the upper front of the unit while rejecting heat/cool from the top of the unit.
The 2OACH models range in capacities from 12,000 BTU/h to 60,000 BTU/h to satisfy most space cooling or heating requirements.
The 2OACH is a self-contained unit with the entire heat pump system, evaporator, and condenser fan motors, and electrical components neatly arranged in a gray and blue polyester powder coated metal cabinet. When connected to the proper source of electrical power, the 2OACH unit is controlled by a solid-state electronic controller, with numerous options of temperature and airflow controls that will provide the desired level of comfort when cooling or heating.
Deluxe Electronic Controller with Large LED Display
Automatic Cooling Mode
Automatic and Manual 6-Speed Fan Control
Available in Voltages: 115, 230, 230/3, 460/3
Rear Swivel Casters
Front Swivel Casters with Brake
10 Foot Power Cord LCDI (Some Models)
Washable Electrostatic Air Filters
Built-in Hour Meter Records Compressor Operating Time
Manual reset High-pressure safety switch
Equipped with a Condensate Reservoir Tank
5-Ton Models Equipped with Automatic Condensate Pump
The 2OACH3634 portable air-cooled heat pump is designed for permanent or temporary spot cooling or heating applications.
Whether you’re up against the coldest winter or hottest summer, this American-made unit will deliver year after year. It targets cooled or heated air to specific areas or objects through a supply air grill located on the upper front of the unit, while discharging exhaust air from the top of the unit.
The unit is encased in a blue and gray polyester powder-coated 18-gauge sheet metal cabinet. The solid-state electronic controller provides a range of options for temperature and airflow, to deliver the desired level of comfort when cooling or heating.
Accessories are available including an optional condensate pump, nozzles and flexible duct exhaust kits.
Dedicated circuit and time delay fuses/circuit breakers are recommended.
Specifications are subject to change without notice.
Amps: 8.7
Voltage: 460V/3 Phase
Solid state electronic controller
Large LED display
Automatic mode changeover
6-speed fan control
Swivel casters (Front locking)
10-foot power cord LCDI
Washable electrostatic air filter
Manual reset high-pressure safety switch
5-gal. condensate reservoir tank
Condensate overflow alert
Three phase power indicator light
UL Listed (U.S.A. and Canada)
Made in the U.S.A.
Weight 400 lbs.
50 ¼ ” H x 27 ½” W × 35” D
Cooling Ambient Operating Range: 65ºF to 105ºF
Heating Ambient Operating Range: 40ºF to 85ºF
Not Approved for Outdoor Use
1- and 1.5-ton 115V, 3-ton 208-230V/1Ph or 460V/3Ph, and 5-ton 208-230V/1Ph or 3Ph, 460V/3Ph models are also available.
Airrex heat pumps operate in air temperatures from 68°to 113°F for cool mode and 50°to 81°F for heat mode. This heat pump utilizes eco-friendly 410A refrigerant. Our heat pumps may require a fresh air supply for proper operation. Includes removable, washable air filters for easy maintenance. Thermostatically protected compressor includes high and low pressure warnings and has 60,000 BTU cooling and 60,000 BTU heating feature 12″ supply duct and 16″ return duct and 26″ diameter top warm air discharge. 1 Year Warranty. 3 Year LG compressor warranty.
Cooling capacity: 60,000
Heating capacity: 60,000
Voltage: 220V
Power supply: 220V 60Hz 1Ph
Current consumption (amps): 33.7 (Cool) 33.2 (Heat)
Circuit breaker size (amps): 50
Rated power consumption: 7.12 (Cool) 6.96 (Heat)
Amp rating: 50
Compressor input: 5.7
Air flow (cfm, high/low) evaporator: 1,620
Static pressure: 0.071
Power cord: Terminal Type
Power cord length: Terminal Type
Operating conditions: Cool: 65°F DB 60%RH – 113°F DB 40%RH / Heat: 50°F DB 70%RH – 81°F 50%RH
Airrex AHSC-60-480-3 – 5 Ton (480V/3 phase) Heat Pump
Airrex heat pumps operate in air temperatures from 68°to 113°F for cool mode and 50°to 81°F for heat mode. This heat pump utilizes eco-friendly 410A refrigerant. Our heatpumps may require a fresh air supply for proper operation. Includes removable, washable air filters for easy maintenance. Thermostatically protected compressor includes high and low pressure warnings and has 60,000 BTU cooling and 60,000 BTU heating feature 12″ supply duct and 16″ return duct and 26″ diameter top warm air discharge. 1 Year Warranty. 3 Year LG compressor warranty.
Cooling capacity: 60,000
Heating capacity: 60,000
Voltage: 480V
Power supply: 460V 60Hz 3Ph
Current consumption (amps): 10.6 (Cool) 9.7 (Heat)
The Portable Air Group offers high quality, competitively-priced portable heat pumps that can heat and cool any space temporarily or permanently.
With its full-featured design, high sensible cooling, and balanced air system, the KwiKool KPHP1811 is the perfect solution for comfort cooling and heating applications.
